Nelweld 4000

The Nelson Nelweld 4000 is a durable drawn arc stud welding machine able to meet the exacting requirements needed in today’s market. It features a microprocessor-based system capable of welding studs up to 7/8 inch diameter.

Category:

Description

Stud range: 3/16 in. to 7/8 in. (5 mm to 22 mm)

Specifications

Transformer rating 2400 amps
Input voltage 230/460/575 VAC-60 Hz

208/230/460 VAC-60 Hz

400 VAC-50/60 Hz CE

220/350/415/440 VAC-50/60 Hz

Fusing 150 A at 208 VAC

150 A at 230 VAC

100 A at 460 VAC

100 A at 575 VAC

400 V – Check local standards

Timing control 20-1500 milliseconds, stepless
Regulated Output 300-2100 amps, regulated
Dimensions 24 in. x 27 in. x 33.5 in.
Weight 725 lbs. (330 kg)

Duty Cycle

Rated at continuous operation

7/8 in. (22 mm) 4 per minute
3/4 in. (19 mm) 12 per minute
5/8 in. (16 mm) 15 per minute
1/2 in. (13 mm) 19 per minute
3/8 in. (10 mm) 22 per minute
5/16 in. (8 mm) 40 per minute
1/4 in. (6 mm) 50 per minute
3/16 in. (5 mm) unlimited

The duty cycle is reduced 50% for 400V CE units.

Single Gun System Configuration

Power/control unit 230/460/575 VAC 60 Hz
Power/control unit 208/230/460 VAC 60 Hz
Power/control unit 400 VAC CE 50/60 Hz
Power/control unit 220/380/415/440 VAC 50/60 Hz
NS-40N Welding Gun
#1-25 ft. Ground cable and clamp
#1-25 ft. Combination cable

Dual Gun System Configuration

Power/control unit 230/460/575 VAC 60 Hz
Power/control unit 208/230/460 VAC 60 Hz
Power/control unit 400 VAC CE 50/60 Hz
Power/control unit 220/380/415/440 VAC 50/60 Hz
NS-40N Welding Gun (2 required)
#1-25 ft. Ground cable and clamp (2 required)
#1-25 ft. Combination cable (2 required)

Additional information

Manufacturer

Nelson Fastener Systems